Package: libregexp-common-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 372
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2013031301-1
Depends: perl
Description: module with common regular expressions
 Regexp::Common is a Perl module that exports a single hash ('%RE') that
 stores or generates commonly needed regular expressions.
 .
 The module currently provides the following patterns:
 .
   * balanced parentheses and brackets
   * delimited text (with escapes)
   * integers and floating-point numbers in any base (up to 36)
   * comments in 44 languages
   * offensive language
   * lists of any pattern
   * IPv4 and IPv6 addresses
   * URIs
   * Zip codes
Homepage: https://metacpan.org/release/Regexp-Common/

Package: libcgmanager0
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 154
Maintainer: Serge Hallyn <serge.hallyn@ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cgmanager
Version: 0.33-2+deb8u2
Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2)
Description: Central cgroup manager daemon (client library)
 cgmanager provides a central cgroup manager daemon and a
 per-namespace manager proxy, allowing users and programs
 to administrate cgroups through D-Bus requests.
 .
 This package contains the shared library.
Homepage: http://cgmanager.linuxcontainers.org/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1447
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 270
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 5.9+20140913-1+deb8u2
Depends: libtinfo5 (= 5.9+20140913-1+deb8u2), libc6 (>= 2.15)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: libclass-c3-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 32
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libclass-c3-xs-perl (0.13-2)
Version: 0.13-2+b1
Depends: perl (>= 5.20.0-4), perlapi-5.20.0, libc6 (>= 2.2.5)
Enhances: libclass-c3-perl (>= 0.16)
Description: Perl module to accelerate Class::C3
 Class::C3::XS is a Perl module designed to enhance the performance of the
 Class::C3 package (see libclass-c3-perl). It does so automatically and is not
 designed to be used directly; once installed, it should accelerate all programs
 that make use of Class::C3 itself.
Homepage: https://metacpan.org/release/Class-C3-XS

Package: libsub-install-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 60
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.928-1
Depends: perl
Description: module for installing subroutines into packages easily
 Sub::Install module makes it easy to install subroutines into packages
 without the unsightly mess of no strict or typeglobs lying about where
 just anyone can see them.
Homepage: https://github.com/rjbs/Sub-Install

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 157
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit (1:2.4-1)
Version: 1:2.4-1+b1
Depends: libaudit-common (>= 1:2.4-1), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: http://people.redhat.com/sgrubb/audit/

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 109
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline6
Version: 6.3-8
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 441
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 5.9+20140913-1+deb8u2
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 85
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.8.3-13.1
Depends: libc6 (>= 2.14), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 4657
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.20.2-3+deb8u9
Replaces: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl5-base, perlapi-5.20.0, perlapi-5.20.1, perlapi-5.20.2
Pre-Depends: libc6 (>= 2.14), dpkg (>= 1.17.17)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libfile-path-perl (<< 2.09), libfile-spec-perl (<< 3.4801), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.29), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.38), libsocket-perl (<< 2.013), libxsloader-perl (<< 0.17), pdl (<< 1:2.007-4), perl (<< 5.20.0~)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: libpackage-constants-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 47
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.04-1
Depends: perl
Description: List constants defined in a package
 Package::Constants lists all the constants defined in a certain package. This
 can be useful for, among others, setting up an autogenerated
 @EXPORT/@EXPORT_OK for a Constants.pm file.
Homepage: https://metacpan.org/release/Package-Constants

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 101
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 215-17+deb8u7
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libudev shared library
 This library provides access to udev device information.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: libdata-optlist-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 54
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.109-1
Depends: perl, libparams-util-perl, libsub-install-perl
Description: module to parse and validate simple name/value option pairs
 Data::OptList is a Perl module useful for working with simple name-and-value
 option pairs. It assumes any defined scalar is a name and any reference after
 it is its value.
Homepage: https://metacpan.org/release/Data-OptList/

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 30
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.4.47-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 82
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.42.12-2)
Version: 1.42.12-2+b1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 386
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.1.0-6+deb8u4
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 309
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils (5.1.1alpha+20120614-2)
Version: 5.1.1alpha+20120614-2+b3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: inetutils-ping
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 307
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Source: inetutils
Version: 2:1.9.2.39.3a460-3
Provides: ping
Depends: libc6 (>= 2.15), netbase
Conflicts: hurd (<= 20010718-1), ping
Description: ICMP echo tool
 Ping uses ICMP to send out echo requests, and uses the reply packets to
 calculate latency between the sending and the destination hosts.
 .
 This is the portable GNU implementation of ping.
Homepage: https://www.gnu.org/software/inetutils/

Package: libdata-section-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 65
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.200006-1
Depends: perl, libmro-compat-perl, libsub-exporter-perl
Description: module to read chunks of data from a module's DATA section
 Data::Section is a Perl module that provides an easy way to access multiple
 named chunks of line-oriented data in your module's DATA section. It was
 written to allow modules to store their own templates, but is probably useful
 for other purposes as well.
Homepage: https://github.com/rjbs/Data-Section

Package: libpam-systemd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 258
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 215-17+deb8u7
Depends: libc6 (>= 2.17), libcap2 (>= 1:2.10), libpam0g (>= 0.99.7.1), systemd (= 215-17+deb8u7), libpam-runtime (>= 1.0.1-6), dbus, systemd-shim (>= 8-2) | systemd-sysv
Pre-Depends: multiarch-support
Description: system and service manager - PAM module
 systemd is a replacement for sysvinit.  It is dependency-based and
 able to read the LSB init script headers in addition to parsing rcN.d
 links as hints.
 .
 It also provides process supervision using cgroups and the ability to
 not only depend on other init script being started, but also
 availability of a given mount point or dbus service.
 .
 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 248
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/

Package: libpam-cap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: amd64
Multi-Arch: same
Source: libcap2
Version: 1:2.24-8
Replaces: libcap2-bin (<< 1:2.22-1.1)
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10), libpam0g (>= 0.99.7.1), libpam-runtime (>= 1.1.3-2~)
Breaks: libcap2-bin (<< 1:2.22-1.1)
Conffiles:
 /etc/security/capability.conf fa5804a90b16addeec23008102b4746d
Description: POSIX 1003.1e capabilities (PAM module)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the PAM module for enforcing capabilities on users and
 groups at PAM session start time.
Homepage: http://sites.google.com/site/fullycapable/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1272
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.20-4.1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3 (>= 1:8.35)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 764
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 22.21-2
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.14), libtinfo5
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3075
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.0.1t-1+deb8u7
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 185
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.37
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 386
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.42.12-2)
Version: 1.42.12-2+b1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 147
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: debianutils (4.4)
Version: 4.4+b1
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 998
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.6.3-2+deb8u4
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Pre-Depends: multiarch-support
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, IDEA, Salsa, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512,
 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 353
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 5.9+20140913-1+deb8u2
Depends: libtinfo5 (= 5.9+20140913-1+deb8u2), libc6 (>= 2.15)
Pre-Depends: multiarch-support
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 5010
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.3-11+deb8u1
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc e62ae447bdd228160f1f0b6bab8a7fd3
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 89
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.

Package: libgpm2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 48
Maintainer: Peter Samuelson <peter@p12n.org>
Architecture: amd64
Multi-Arch: same
Source: gpm (1.20.4-6.1)
Version: 1.20.4-6.1+b2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Suggests: gpm
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Homepage: http://www.nico.schottelius.org/software/gpm/

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1812
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-9
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: rename
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 69
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.20-3
Replaces: libfile-rename-perl
Provides: libfile-rename-perl
Depends: perl
Conflicts: libfile-rename-perl
Description: Perl extension for renaming multiple files
 This package provides both a perl interface for renaming files
 (File::Rename) and a command line tool 'rename' which is intended to
 replace the version currently supplied by the perl package.
Homepage: https://metacpan.org/release/File-Rename

Package: libcap2-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 110
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2
Version: 1:2.24-8
Replaces: libcap-bin
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: http://sites.google.com/site/fullycapable/

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 614
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.56
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 179
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib (1:1.2.8.dfsg-2)
Version: 1:1.2.8.dfsg-2+b1
Provides: libz1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 59
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 3.15
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 929
Maintainer: Bash Completion Maintainers <bash-completion-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:2.1-4
Replaces: bash, cryptsetup (<< 2:1.1.2-2), xen-tools (<= 4.1-1)
Depends: bash (>= 3.2)
Pre-Depends: dpkg (>= 1.15.7.2~)
Breaks: xen-tools (<= 4.1-1)
Conffiles:
 /etc/profile.d/bash_completion.sh 749e4786543bc3d19e20b0e214806c35
 /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
Description: programmable completion for the bash shell
 bash completion extends bash's standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.
Homepage: http://bash-completion.alioth.debian.org

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 194
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.19-18+deb8u10
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1712
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017c-0+deb8u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-jessie
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 198
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.3-17
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 239
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Version: 1.6-4
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: libglib2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4570
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glib2.0 (2.42.1-1)
Version: 2.42.1-1+b1
Replaces: libglib2.0-dev (<< 2.23.2-2)
Depends: libc6 (>= 2.17), libffi6 (>= 3.0.4), libpcre3 (>= 1:8.35), libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2)
Pre-Depends: multiarch-support
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Breaks: glib-networking (<< 2.33.12), gvfs (<< 1.8), libgnome-desktop-3-2 (<< 3.4.2-2), python-gi (<< 3.7.2)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: http://www.gtk.org/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 414
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg
Version: 1.4.18-7+deb8u3
Depends: libbz2-1.0, libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org

Package: libcap2
Status: hold ok installed
Priority: standard
Section: libs
Installed-Size: 61
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: amd64
Multi-Arch: same
Version: 1:2.24-8
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 181
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.25.2-6)
Version: 1:2.25.2-6
Pre-Depends: libc6 (>= 2.15), libsystemd0
Recommends: bsdmainutils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 191
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: amd64
Source: dash (0.5.7-4)
Version: 0.5.7-4+b1
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: gnupg
Status: hold ok installed
Priority: important
Section: utils
Installed-Size: 4893
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.18-7+deb8u3
Depends: gpgv, libbz2-1.0, libc6 (>= 2.15), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4)
Recommends: gnupg-curl, libldap-2.4-2 (>= 2.4.7)
Suggests: gnupg-doc, libpcsclite1, parcimonie, xloadimage | imagemagick | eog
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
Homepage: http://www.gnupg.org

Package: perl-modules
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 15108
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.20.2-3+deb8u9
Replaces: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libpackage-constants-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Depends: perl-base (>= 5.20.2-3+deb8u9)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.20.2-1), libarchive-extract-perl, libmodule-pluggable-perl, libpod-latex-perl, libterm-ui-perl, libtext-soundex-perl, libcgi-pm-perl, libmodule-build-perl, libpackage-constants-perl
Suggests: libb-lint-perl, libcpanplus-dist-build-perl, libcpanplus-perl, libfile-checktree-perl, liblog-message-simple-perl, liblog-message-perl, libobject-accessor-perl
Breaks: cli-common (<< 0.9+nmu1), libansicolor-perl (<< 4.02), libarchive-tar-perl (<< 1.96), libattribute-handlers-perl (<< 0.96), libautodie-perl (<< 2.23), libcgi-pm-perl (<< 3.65), libcpan-meta-perl (<< 2.140640), libcpan-meta-requirements-perl (<< 2.125), libcpan-meta-yaml-perl (<< 0.012), libdigest-perl (<< 1.17), libexperimental-perl (<< 0.007), libextutils-cbuilder-perl (<< 0.280217), libextutils-command-perl (<< 1.18), libextutils-install-perl (<< 1.67), libextutils-parsexs-perl (<< 3.240000), libfile-spec-perl (<< 3.4801), libhttp-tiny-perl (<< 0.043), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27203), liblocale-codes-perl (<< 3.30), liblocale-maketext-perl (<< 1.25), liblocale-maketext-simple-perl (<< 0.21), libmath-bigint-perl (<< 1.9993), libmath-complex-perl (<< 1.59), libmodule-build-perl (<< 0.420500), libmodule-corelist-perl (<< 5.20150214), libmodule-load-conditional-perl (<< 0.62), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000019), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.43), libpackage-constants-perl (<< 0.04), libparams-check-perl (<< 0.38), libparent-perl (<< 0.228), libparse-cpan-meta-perl (<< 1.4414), libperl-ostype-perl (<< 1.007), libpod-escapes-perl (<< 1.06), libpod-parser-perl (<< 1.62), libpod-simple-perl (<< 3.28), libtest-harness-perl (<< 3.30), libtest-simple-perl (<< 1.001002), libthread-queue-perl (<< 3.05), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.04), libversion-perl (<< 1:0.9909), libversion-requirements-perl (<< 0.101022), mono-apache-server2 (<< 3.8-2.1), mono-apache-server4 (<< 3.8-2.1), mono-fastcgi-server2 (<< 3.8-2.1), mono-fastcgi-server4 (<< 3.8-2.1), patcher (<< 0.0.20040521-6.1), pdl (<< 1:2.007-4), perl (<< 5.20.2~), podlators-perl (<< 2.3.1), polygen-data (<< 1.0.6.ds2-13.1), pristine-tar (<< 1.33), pure-ftpd-common (<< 1.0.36-3.2), rinse (<< 3.0.7), shorewall (<< 4.6.4.3-2), shorewall-core (<< 4.6.4.3-2), tvtime (<< 1.0.2-14)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
 /etc/perl/sitecustomize.pl 5b3fc409c28ac6baf439b733046f0271
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules' directly, they
 should use `perl' (which depends on `perl-modules') instead.
Homepage: http://dev.perl.org/perl5/

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 357
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.25.2-6
Pre-Depends: libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.0.15), libsmartcols1 (>= 2.25)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 183
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 215-17+deb8u7
Pre-Depends: libc6 (>= 2.14), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), multiarch-support
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 10229
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.19-18+deb8u10
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.19), locales-all (<< 2.19), lsb-core (<= 3.2-27), nscd (<< 2.19)
Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libprocps3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 132
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.9-9
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps

Package: libtext-soundex-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 89
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libtext-soundex-perl (3.4-1)
Version: 3.4-1+b2
Depends: perl (>= 5.20.0-4), perlapi-5.20.0, libc6 (>= 2.4)
Description: implementation of the soundex algorithm
 Text::Soundex implements the original soundex algorithm developed by Robert
 Russell and Margaret Odell, patented in 1918 and 1922, as well as a variation
 called "American Soundex" used for US census data, and current maintained by
 the National Archives and Records Administration (NARA).
Homepage: https://metacpan.org/release/Text-Soundex/

Package: startpar
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 95
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 0.59-3
Replaces: sysvinit-utils (<< 2.88dsf-52)
Depends: libc6 (>= 2.15)
Suggests: insserv, sysv-rc
Breaks: sysvinit-utils (<< 2.88dsf-52)
Conffiles:
 /etc/init/startpar-bridge.conf 152b77b1904939b461edc251844d0008
Description: run processes in parallel and multiplex their output
 Used by the sysv-rc boot system executor to run init.d scripts in parallel
 while making sure the script output is not completely messed up.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 618
Maintainer: Mark Baker <mark@mnb.org.uk>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.35-3.3+deb8u4
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 330
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.111-2.2+deb8u1)
Version: 2:1.02.90-2.2+deb8u1
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.90-2.2+deb8u1)
Pre-Depends: multiarch-support
Breaks: lvm2 (<< 2.02.66)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/

Package: libmro-compat-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 59
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.12-1
Depends: perl, libclass-c3-perl (>= 0.24)
Recommends: libclass-c3-xs-perl
Description: mro::* interface compatibility for Perls < 5.9.5
 The "mro" namespace provides several utilities for dealing with method
 resolution order and method caching in general in Perl 5.9.5 and higher.
 .
 MRO::Compat provides those interfaces for earlier versions of Perl
 (back to 5.6.0 anyway).
Homepage: http://search.cpan.org/dist/MRO-Compat/

Package: sgml-base
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 113
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: all
Version: 1.26+nmu4
Depends: perl
Pre-Depends: dpkg (>= 1.16.4)
Suggests: sgml-base-doc
Conflicts: sgml-data (<= 0.02), sgmltools-2 (<= 2.0.2-4)
Description: SGML infrastructure and SGML catalog file support
 This package creates the SGML infrastructure directories and provides
 SGML catalog file support in compliance with the current Debian SGML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/sgml
      - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
      - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
 .
   * update-catalog(8): tool for maintaining the root SGML catalog
     file and the package SGML catalog files in the '/etc/sgml' directory

Package: libpod-latex-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 129
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.61-1
Depends: perl
Description: module to convert Pod data to formatted LaTeX
 Pod::LaTeX is a module to convert documentation in the Pod format into LaTeX.
 The pod2latex command uses this module for translation.
 .
 Pod::LaTeX is a derived class from Pod::Select.
Homepage: https://metacpan.org/release/Pod-LaTeX/

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 14249
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8.23-4
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1093
Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.16.0-2
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables10
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c
 /etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2781
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs (1.42.12-2)
Version: 1.42.12-2+b1
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.42.12-2+b1), libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf e2cdbf0620e93949af5857eb4739f949
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net

Package: libpng12-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 267
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpng
Version: 1.2.50-2+deb8u3
Replaces: libpng12-dev (<= 1.2.8rel-7)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Conflicts: libpng12-dev (<= 1.2.8rel-7), mzscheme (<= 1:209-5), pngcrush (<= 1.5.10-2), pngmeta (<= 1.11-3), povray-3.5 (<= 3.5.0c-10), qemacs (<= 0.3.1-5)
Description: PNG library - runtime
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2261
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.27.1-2+deb8u1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: liblog-message-simple-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 57
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.10-2
Depends: perl, liblog-message-perl
Description: simplified interface to Log::Message
 Log::Message::Simple provides standardized logging facilities using the
 Log::Message module.
Homepage: https://metacpan.org/release/Log-Message-Simple

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 114
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2 (1.0.6-7)
Version: 1.0.6-7+b3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 134
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 18-3
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libxml2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1766
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 2.9.1+dfsg1-5+deb8u5
Depends: libc6 (>= 2.15), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Pre-Depends: multiarch-support
Recommends: xml-core
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org/

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 326
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.

Package: cgmanager
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 324
Maintainer: Serge Hallyn <serge.hallyn@ubuntu.com>
Architecture: amd64
Version: 0.33-2+deb8u2
Replaces: cgmanager-utils (<< 0.30-1)
Provides: cgmanager-utils
Depends: libc6 (>= 2.15), libcgmanager0 (>= 0.32), libdbus-1-3 (>= 1.2.16), libnih-dbus1 (>= 1.0.0), libnih1 (>= 1.0.0), init-system-helpers (>= 1.18~)
Conflicts: cgmanager-utils (<< 0.30-1)
Conffiles:
 /etc/init.d/cgmanager 7fe1cc959fc9bad5f0ad17fbbc694f71
 /etc/init.d/cgproxy e107f190811dde89a2208e7f3fbc4ddc
 /etc/init/cgmanager.conf 5aaa1853374898fdaf7a80c60c8ce62d
 /etc/init/cgproxy.conf 6d2f480ee01e21e9e6392934c16c4689
Description: Central cgroup manager daemon
 cgmanager provides a central cgroup manager daemon and a
 per-namespace manager proxy, allowing users and programs
 to administrate cgroups through D-Bus requests.
 .
 This package contains the cgroup management daemon and
 proxy.
Homepage: http://cgmanager.linuxcontainers.org/

Package: libcgi-fast-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 55
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1:2.04-1
Replaces: libcgi-pm-perl (<< 4)
Depends: perl, libcgi-pm-perl (>= 4), libfcgi-perl
Breaks: libcgi-pm-perl (<< 4)
Description: CGI subclass for work with FCGI
 CGI::Fast is a subclass of the CGI object created by CGI.pm. It is
 specialized to work with the FCGI module, which greatly speeds up CGI scripts
 by turning them into persistently running server processes. Scripts that
 perform time-consuming initialization processes, such as loading large
 modules or opening persistent database connections, will see large
 performance improvements.
Homepage: https://metacpan.org/release/CGI-Fast

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 72
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 4.1+Debian13+nmu1
Description: Linux Standard Base 4.1 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 670
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.9-9
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libprocps3, libtinfo5, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 021482ebab1024f5ed76e650e5191e8f
 /etc/sysctl.conf 76c1d8285c578d5e827c3e07b9738112
 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://gitorious.org/procps

Package: libsoftware-license-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 497
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.103010-3
Depends: libdata-section-perl, libsub-install-perl, libtext-template-perl, perl
Description: module providing templated software licenses
 Software::License is a Perl module used by various tools for module building,
 installation, and distribution to provide a simple way of referencing popular
 free and open-source software licenses.
Homepage: https://metacpan.org/release/Software-License

Package: libsub-exporter-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 135
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.986-1
Depends: perl, libdata-optlist-perl, libsub-install-perl
Description: sophisticated exporter for custom-built routines
 When you use a perl module, first it is "required" function used, then its
 import method is called.
 .
 Sub::Exporter provides a sophisticated alternative to Exporter.pm.  It allows
 for renaming, currying/sub-generation etc.
 .
 Sub::Exporter builds a custom exporter which can then be installed into your
 module. It builds this method based on configuration passed to its
 setup_exporter method.
Homepage: https://metacpan.org/release/Sub-Exporter/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 17095
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 5.20.2-3+deb8u9
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libmodule-corelist-perl (<< 2.14-2), libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-base (<< 5.10.1-12), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1)
Provides: data-dumper, libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl5
Depends: perl-base (= 5.20.2-3+deb8u9), perl-modules (>= 5.20.2-3+deb8u9), libbz2-1.0, libc6 (>= 2.14), libdb5.3, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.2.3)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase, rename
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.064), libcompress-raw-zlib-perl (<< 2.065), libcompress-zlib-perl (<< 2.064), libdigest-md5-perl (<< 2.53), libdigest-sha-perl (<< 5.88), libencode-perl (<< 2.63-1+deb8u1), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.064), libio-compress-bzip2-perl (<< 2.064), libio-compress-perl (<< 2.064), libio-compress-zlib-perl (<< 2.064), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.14), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.49.01), libsys-syslog-perl (<< 0.33), libthreads-perl (<< 1.93), libthreads-shared-perl (<< 1.46), libtime-hires-perl (<< 1.9726), libtime-piece-perl (<< 1.27), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1), perl-doc (<< 5.20.2-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 444
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.17-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: http://www.gnupg.org/related_software/libgpg-error/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 413
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8+deb8u8
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version bd8fdd7b52c83329fe154af7114cc535
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue a7eef95d86c3649a192350845d8cb2ae
 /etc/issue.net 8b9e8badfb7d547ef236e3165dd363e4
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 110
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: libarchive-extract-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 105
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.72-1
Depends: perl (>= 5.13.6)
Description: generic archive extracting module
 Archive::Extract is a generic archive extraction mechanism.
 .
 It allows you to extract any archive file of the type .tar, .tar.gz, .gz, .Z,
 tar.bz2, .tbz, .bz2, .zip, .xz,, .txz, .tar.xz or .lzma without having to
 worry how it does so, or use different interfaces for each type by using
 either perl modules, or commandline tools on your system.
Homepage: https://metacpan.org/release/Archive-Extract/

Package: libmodule-signature-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 108
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.73-1+deb8u2
Depends: perl
Recommends: gnupg | gnupg2
Description: module to manipulate CPAN SIGNATURE files
 Module::Signature is a Perl module that adds cryptographic authentications to
 CPAN distributions, via the special SIGNATURE file. It also includes various
 tools to sign distributions and to verify signatures and supports using many
 different cryptographic hashing algorithms.
Homepage: https://metacpan.org/release/Module-Signature/

Package: libglib2.0-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 9045
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: glib2.0
Version: 2.42.1-1
Description: Common files for GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed for the runtime libraries to display messages in
 languages other than English.
Homepage: http://www.gtk.org/

Package: passwd
Status: hold ok installed
Priority: required
Section: admin
Installed-Size: 2137
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.2-3+deb8u4
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/

Package: init-system-helpers
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 97
Maintainer: pkg-systemd-maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.22
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e.g. sysvinit, upstart,
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: libpod-readme-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 36
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.11-1
Depends: perl, libregexp-common-perl
Description: Perl module to convert POD to README file
 Pod::Readme is a subclass of Pod::PlainText which provides
 additional POD markup for generating README files
 .
 This module allows authors to mark portions of the POD to
 be included only in, or to be excluded from the README file.
 It also allows you to include portions of another file (such
 as a separate ChangeLog).
Homepage: http://search.cpan.org/dist/Pod-Readme/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3254
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.19-18+deb8u10
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>> 2.19), libc6 (<< 2.20)
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsemanage1
Status: hold ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage (2.3-1)
Version: 2.3-1+b1
Depends: libsemanage-common (= 2.3-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.1.12), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4)
Pre-Depends: multiarch-support
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 5924
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 215-17+deb8u7
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.0.65), libudev1 (= 215-17+deb8u7), adduser, lsb-base (>= 3.0-6), util-linux (>= 2.16), procps
Pre-Depends: debconf (>= 1.4.69) | debconf-2.0
Breaks: consolekit (<< 0.4.6-1), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 215-1)
Conffiles:
 /etc/init.d/udev 988e81a81706a99e7f4b83988b386b00
 /etc/init.d/udev-finish fd3ce194c134bcd790681ea487b19126
 /etc/init/udev-fallback-graphics.conf b8bfe7164e10cd0e53494b243c5728b1
 /etc/init/udev-finish.conf 089140a32d519840674be9a274da1a42
 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/modprobe.d/fbdev-blacklist.conf 0b9c466830040ec52986cc3ea117bef5
 /etc/udev/udev.conf ae415f84e2967eff580089fb08aa0a61
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 147
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Source: sysvinit
Version: 2.88dsf-59
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), startpar
Suggests: bootlogd, sash
Breaks: upstart (<< 1.5-0ubuntu5)
Conflicts: chkconfig (<< 11.0-79.1-2), last, startpar (<< 0.58-2), sysvconfig
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, service, sulogin
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 137
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017.5~deb8u1
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec
 /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef
 /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b
 /etc/apt/trusted.gpg.d/debian-archive-stretch-automatic.gpg c82e16869fb2d6234aff8b63fa00fb65
 /etc/apt/trusted.gpg.d/debian-archive-stretch-security-automatic.gpg 9fcd290147d1ed6b6768c1d1163f1383
 /etc/apt/trusted.gpg.d/debian-archive-stretch-stable.gpg 829333ce438185f23bd9c122a19ef25d
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg e5d3c1f7461bc12685f9b331c60beadd
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg 722258fff5af68c002429c4433bd228b
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.3-1
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf e69d42a4d98a93c3b8e201bdda367c55
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.192
Depends: libc6 (>= 2.2.5)
Pre-Depends: multiarch-support
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. This is a reimplementation of the original debconf version
 in C.
 .
 This is the libraries needed by libdebconfclient-dev and cdebconf.

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 213
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 2.3-2
Depends: libc6 (>= 2.14), libpcre3 (>= 8.10)
Pre-Depends: multiarch-support
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/

Package: systemd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 11421
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 215-17+deb8u7
Depends: libacl1 (>= 2.2.51-8), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libkmod2 (>= 5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9), libsystemd0 (= 215-17+deb8u7), util-linux (>= 2.19.1-2), mount (>= 2.21), initscripts (>= 2.88dsf-53.2), sysv-rc, udev (>= 208-8), acl, adduser, libcap2-bin
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui
Breaks: lsb-base (<< 4.1+Debian4), lvm2 (<< 2.02.104-1), systemd-shim (<< 8-2)
Conflicts: klogd
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
 /etc/dbus-1/system.d/org.freedesktop.login1.conf 96bf488f3da8f0ca813cc78e71eeb605
 /etc/dbus-1/system.d/org.freedesktop.machine1.conf d658acaf7192de735ab798c58ab149ae
 /etc/dbus-1/system.d/org.freedesktop.systemd1.conf 46533268285a0df22b1f1667ddc05642
 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
 /etc/pam.d/systemd-user aebb8b8a2c698614b00961f327a683ef
 /etc/systemd/bootchart.conf 838a83315ad2f9d4c4b7f20b7475ba28
 /etc/systemd/journald.conf 51f19202dcc5aff6d2c3448dbf92f354
 /etc/systemd/logind.conf 747ae2312b6922546190bf806d8d12be
 /etc/systemd/resolved.conf 81a9c57d4eb587decc49040595674c5a
 /etc/systemd/system.conf 3d0e13a72d72acb55409a831b72a15e6
 /etc/systemd/timesyncd.conf 605e4f25097b8ea22f2f5cb3fde3f13c
 /etc/systemd/user.conf 9eaad8fbb7bb6230d4b28abb76b4e81c
Description: system and service manager
 systemd is a replacement for sysvinit.  It is dependency-based and
 able to read the LSB init script headers in addition to parsing rcN.d
 links as hints.
 .
 It also provides process supervision using cgroups and the ability to
 not only depend on other init script being started, but also
 availability of a given mount point or dbus service.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6643
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.17.27
Replaces: manpages-it (<< 2.80-4)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4), tar (>= 1.23)
Suggests: apt
Breaks: apt (<< 0.7.7~), apt-cudf (<< 3.3~beta1-3~), aptitude (<< 0.4.7-1~), auctex (<< 11.87-3+deb8u1~), ccache (<< 3.1.10-1~), cups (<< 1.7.5-10~), debian-security-support (<< 2014.10.26~), distcc (<< 3.1-6.1~), doc-base (<< 0.10.5~), dpkg-dev (<< 1.15.8), fontconfig (<< 2.11.0-6.2~), fusionforge-plugin-mediawiki (<< 5.3.2+20141104-3~), gap-core (<< 4r7p5-2~), gitweb (<< 1:2.1.4-2.1~), grace (<< 1:5.1.24-3~), gxine (<< 0.5.908-3.1~), hoogle (<< 4.2.33-4~), icecc (<< 1.0.1-2~), install-info (<< 5.1.dfsg.1-3~), libapache2-mod-php5 (<< 5.6.4+dfsg-3~), libapache2-mod-php5filter (<< 5.6.4+dfsg-3~), libdpkg-perl (<< 1.15.8), libjs-protoaculous (<< 5~), man-db (<< 2.6.3-6~), mcollective (<< 2.6.0+dfsg-2.1~), php5-fpm (<< 5.6.4+dfsg-3~), pypy (<< 2.4.0+dfsg-3~), readahead-fedora (<< 2:1.5.6-5.2~), wordpress (<< 4.1+dfsg-1~), xfonts-traditional (<< 1.7~), xine-ui (<< 0.99.9-1.2~)
Conflicts: ada-mode (<< 3.6-3+rm), ada-reference-manual (<< 20021112web-4~), asn1-mode (<< 2.7-7~), bogosort (<< 0.4.2-3~), cl-yacc (<< 0.3-3~), cpp-4.1-doc (<< 4.1.2.nf2-4~), cpp-4.2-doc (<< 4.2.4.nf1-4~), gcc-4.1-doc (<< 4.1.2.nf2-4~), gcc-4.2-doc (<< 4.2.4.nf1-4~), gcj-4.1-doc (<< 4.1.2.nf2-4~), gcj-4.2-doc (<< 4.2.4.nf1-4~), gfortran-4.1-doc (<< 4.1.2.nf2-4~), gfortran-4.2-doc (<< 4.2.4.nf1-4~), ggz-docs (<< 0.0.14.1-2~), glame (<< 2.0.1-6~), gnat-4.1-doc (<< 4.1.2.nf2-4~), gnat-4.2-doc (<< 4.2.4.nf1-4~), gtalk (<< 0.99.10-16~), libalogg-dev (<< 1.3.7-2~), libgtk1.2-doc (<< 1.2.10-19~), libnettle-dev (<< 2~), liborbit-dev (<< 0.5.17-12~), libreadline5-dev (<< 5.2-8~), librep-doc (<< 0.90~), mmucl (<< 1.5.2-3~), nxml-mode (<< 20041004-9~), octave2.1-info (<< 1:2.1.73-19+rm), octave3.0-info (<< 1:3.0.5-7+rm), octave3.2-info (<< 3.2.4-12+rm), polgen-doc (<< 1.3-3+rm), r6rs-doc (<< 1.0-2~), serveez-doc (<< 0.1.5-3~), slat (<< 2.0-6~), texlive-base-bin-doc (<< 2007.dfsg.2-9~), ttcn-el (<< 0.6.9-2~), ulog-acctd (<< 0.4.3-3~), xconq-doc (<< 7.4.1-5~), zenirc (<< 2.112.dfsg-1~)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1093
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 1.0.1t-1+deb8u7
Depends: libc6 (>= 2.15), libssl1.0.0 (>= 1.0.1k-3+deb8u3)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf 7df26c55291b33344dc15e3935dabaf3
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.

Package: libterm-ui-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 79
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.42-1
Depends: perl, liblog-message-simple-perl | perl (<< 5.17)
Description: Term::ReadLine UI made easy
 Term::UI is a transparent way of eliminating the overhead of having to format
 a question and then validate the reply, informing the user if the answer was
 not proper and re-issuing the question.
 .
 Simply give it the question you want to ask, optionally with choices the user
 can pick from and a default and Term::UI will DWYM.
 .
 For asking a yes or no question, there's even a shortcut.
Homepage: https://metacpan.org/release/Term-UI/

Package: libcgi-pm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 526
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 4.09-1
Depends: perl
Recommends: libcgi-fast-perl (>= 1:2.01)
Breaks: libcgi-fast-perl (<< 1:2)
Description: module for Common Gateway Interface applications
 CGI.pm is a Perl module that provides classes useful for creating Web forms
 and for parsing their contents. It defines CGI objects, entities that contain
 the values of the current query string and other state variables.
Homepage: https://metacpan.org/release/CGI

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 125
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10), startpar
Recommends: lsb-base (>= 3.2-14)
Suggests: bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: apt
Status: hold ok installed
Priority: important
Section: admin
Installed-Size: 3178
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Version: 1.0.9.8.4
Replaces: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Depends: libapt-pkg4.12 (>= 1.0.9.8.4), libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9), debian-archive-keyring, gnupg
Suggests: aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), apt-doc, python-apt
Breaks: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Conflicts: python-apt (<< 0.7.93.2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 5bf3e7bfa3bec23d634c9f3652da1787
 /etc/cron.daily/apt 4f33a76ad3e46913db2be02f0b587933
 /etc/kernel/postinst.d/apt-auto-removal 5d7236fb0c051eec2f5156b641fc447b
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 37
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: liblocale-gettext-perl (1.05-8)
Version: 1.05-8+b1
Depends: libc6 (>= 2.2.5)
Pre-Depends: perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: module using libc functions for internationalization in Perl
 The gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/gettext

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 123
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.02.111-2.2+deb8u1)
Version: 2:1.02.90-2.2+deb8u1
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.90), util-linux (>> 2.16)
Conflicts: devicekit-disks (<< 009)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 950
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Source: diffutils (1:3.3-1)
Version: 1:3.3-1+b1
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: liblog-message-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 88
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.8-1
Depends: perl
Description: powerful and flexible message logging mechanism
 Log::Message is a generic message storage mechanism. It allows you to store
 messages on a stack -- either shared or private -- and assign meta-data to
 it. Some meta-data will automatically be added for you, like a timestamp and
 a stack trace, but some can be filled in by the user, like a tag by which to
 identify it or group it, and a level at which to handle the message (for
 example, log it, or die with it)
 .
 Log::Message also provides a powerful way of searching through items by
 regexes on messages, tags and level.
Homepage: https://metacpan.org/release/Log-Message/

Package: shared-mime-info
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 4396
Maintainer: Sebastian Dröge <slomo@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3-1
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4)
Conflicts: libglib2.0-0 (<< 2.17.2), libgnomevfs2-0 (<< 1:2.24.0), tracker (<< 0.6.90)
Description: FreeDesktop.org shared MIME database and spec
 This is the shared MIME-info database from the X Desktop Group. It is required
 by any program complying to the Shared MIME-Info Database spec, which is also
 included in this package.
 .
 At this time at least ROX, GNOME, KDE and XFCE use this database.
Homepage: http://freedesktop.org/wiki/Software/shared-mime-info

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 860
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.1+deb8u2)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init b46b23d64860d1557d2a8f44b231fd54
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/

Package: insserv
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 183
Maintainer: Petter Reinholdtsen <pere@debian.org>
Architecture: amd64
Version: 1.14.0-5
Depends: libc6 (>= 2.7)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
 /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1319
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10
Replaces: libstdc++6-4.9-dbg (<< 4.9.0-3)
Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.18), libgcc1 (>= 1:4.1.1)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: gcc-4.9-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 218
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.1-2+deb8u1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.4-1
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: http://people.redhat.com/sgrubb/audit/

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 69
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.42.12-2)
Version: 1.42.12-2+b1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1406
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: findutils (4.4.2-9)
Version: 4.4.2-9+b1
Pre-Depends: libc6 (>= 2.17)
Suggests: mlocate | locate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 252
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/

Package: xml-core
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 188
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: all
Version: 0.13+nmu2
Depends: sgml-base (>= 1.26+nmu2), sed (>= 4.1.2-8)
Suggests: debhelper (>= 9.20120909)
Conffiles:
 /etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa
Description: XML infrastructure and XML catalog file support
 This package creates the XML infrastructure directories and provides
 XML catalog file support in compliance with the current Debian XML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/xml
      - /usr/share/xml/{declaration,entities,misc,schema}
      - /usr/local/share/xml/{declaration,entities,misc,schema}
 .
   * XML catalog schema: OASIS XML Catalog Committee Specification 1.0
 .
   * update-xmlcatalog(8): tool for maintaining the root XML catalog
     file and the package XML catalog files in the '/etc/xml' directory
     as well as local XML catalog files.
 .
   * dh_installxmlcatalogs(1): debhelper tool for installing local XML
     catalog files and registering XML entities in package XML catalog
     files and the root XML catalog file (requires debhelper package)

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng
Version: 0.7.4-2
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 882
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.8.22-0+deb8u1
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcap-ng0, libdbus-1-3 (>= 1.7.6), libexpat1 (>= 2.0.1), libselinux1 (>= 2.0.65), libsystemd0, adduser, lsb-base (>= 3.2-14)
Suggests: dbus-x11
Conffiles:
 /etc/dbus-1/session.conf b96c3a72dbcf8d8019f8d9b3b0c1b743
 /etc/dbus-1/system.conf cc9caaf3b2f4a11f188bf81f0e59eabb
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27
Description: simple interprocess messaging system (daemon and utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.
Homepage: http://dbus.freedesktop.org/

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 357
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 1.32)
Pre-Depends: multiarch-support
Description: device mounting library
 The device mounting library, used by mount and umount helpers.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2186
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Source: shadow
Version: 1:4.2-3+deb8u4
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs c8e7f89a2c5665cf75a760d4341ce2d2
 /etc/pam.d/login 8cc9269fe679cb725d55925e95914499
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty d9e5bf5e6bfa00ddd273a3bcf1a49bec
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/

Package: libmodule-build-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 618
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.421000-2+deb8u1
Depends: perl, libcpan-meta-perl (>= 2.142060) | perl (>= 5.21.3), libperl-ostype-perl, perl (>= 5.11.2) | libextutils-cbuilder-perl, perl (>= 5.12) | libextutils-parsexs-perl, perl (>= 5.13.9) | libmodule-metadata-perl, perl (>= 5.13.9) | libversion-perl (>= 1:0.8700)
Recommends: libarchive-tar-perl, libmodule-signature-perl, libpod-readme-perl, libsoftware-license-perl (>= 0.103009)
Description: framework for building and installing Perl modules
 Module::Build is a framework for easily building, testing and installing Perl
 packages. It is meant as a next-generation replacement for ExtUtils::MakeMaker
 and offers many additional features characteristic of a more modern install
 system, including simple subclassing for custom build actions.
 .
 Because it is written in Pure Perl, it has very few external dependencies. In
 particular, it allows for installation of packages on systems without 'make'
 and will even work without a shell. Its only prerequisites are modules that
 are included with perl 5.6.0 and it is core as of perl 5.10.
Homepage: https://metacpan.org/release/Module-Build

Package: libparams-util-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 53
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libparams-util-perl (1.07-2)
Version: 1.07-2+b1
Depends: perl (>= 5.20.0-4), perlapi-5.20.0, libc6 (>= 2.4)
Description: Perl extension for simple stand-alone param checking functions
 Params::Util provides a basic set of importable functions that makes checking
 parameters easier. The functions provided by Params::Util check in the most
 strictly correct manner, and it should not be fooled by odd cases.
Homepage: https://metacpan.org/release/Params-Util

Package: adduser
Status: hold ok installed
Priority: important
Section: admin
Installed-Size: 1066
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.113+nmu3
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 165
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>= 2.4), mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.88dsf-50), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), initramfs-tools (<< 0.104), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), util-linux (<< 2.20.1-5), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootlogs 41ad826ad3091964c994b03177bbc29b
 /etc/init.d/bootmisc.sh 7e77260cb4071c21a99d581bfb8d2b74
 /etc/init.d/checkfs.sh 8cd37d9296845ce642e5671198469c32
 /etc/init.d/checkroot.sh 9c6f18f6f6b09ce96175bbbc5aaa8c99
 /etc/init.d/checkroot-bootclean.sh 955dcf4da7378f9f981d3f04c94d36d7
 /etc/init.d/halt a0e668699f774d928ddc62954155adb5
 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
 /etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd
 /etc/init.d/motd dbc3f882af04254005bb96e4f780e5a0
 /etc/init.d/mountall.sh 7dc50e51261550184c078955c01b5628
 /etc/init.d/mountall-bootclean.sh 4c6b07a64798d8d78783e271238511f4
 /etc/init.d/mountnfs.sh a33d7b1a4d5043ea997af1f44c600cb9
 /etc/init.d/mountnfs-bootclean.sh 68aeda71fd9ae6861c3859c4ac33ee62
 /etc/init.d/mountdevsubfs.sh c18f4495f67dec33e257946215f54508
 /etc/init.d/mountkernfs.sh 12a99beb128e18bb6b277882233545af
 /etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5
 /etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b
 /etc/init.d/rmnologin eb11c47dd70b51a6e0d927f50490965e
 /etc/init.d/sendsigs 617e0ce4756cd2ac0c53634c4667fe22
 /etc/init.d/single bc7e38f0849ebfe767d162861fae002c
 /etc/init.d/umountfs 49f742a0f5af8124caba6c4264e78aa6
 /etc/init.d/umountnfs.sh 5137d5524cdba56d07e61c1cd5bb7238
 /etc/init.d/umountroot 57c8e9e95211ab355591dc8c211c8e8f
 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/rcS a4af750cc5d1edc264d47dc01d11e1b8
 /etc/default/tmpfs 9af2949a1c0373adfa0c7db2453eee62
 /etc/network/if-up.d/mountnfs 528b2efd88285d2f443fcf54234b5156
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: ca-certificates
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 367
Maintainer: Michael Shuler <michael@pbandjelly.org>
Architecture: all
Multi-Arch: foreign
Version: 20141019+deb8u3
Depends: openssl (>= 1.0.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 This package includes PEM files of CA certificates to allow SSL-based
 applications to check for the authenticity of SSL connections.
 .
 It includes, among others, certificate authorities used by the Debian
 infrastructure and those shipped with Mozilla's browsers.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 80
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.2.52-2
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: acl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 258
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.2.52-2
Depends: libacl1 (= 2.2.52-2), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Description: Access control list utilities
 This package contains the getfacl and setfacl utilities needed for
 manipulating access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1543
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.0-2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 7.0-2)
Homepage: http://www.jedsoft.org/slang/

Package: libfcgi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 79
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 0.77-1+deb8u1
Depends: perl (>= 5.20.2-3+deb8u6), perlapi-5.20.2, libc6 (>= 2.15)
Description: helper module for FastCGI
 FCGI is a simple Perl module for writing FastCGI applications. FastCGI is a
 language-independent, scalable, open extension to CGI that provides faster
 performance by keeping programs persistent in memory and allowing them to
 handle multiple requests. This module provides the core interface needed to
 write these applications.
 .
 For complex applications, you should consider a more full-featured solution
 such as Plack or Catalyst (see libcatalyst-perl).
Homepage: https://metacpan.org/release/FCGI

Package: libapt-pkg4.12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2664
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.0.9.8.4
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 4.9), zlib1g (>= 1:1.2.2.3)
Pre-Depends: multiarch-support
Breaks: apt (<< 0.9.4~), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: xdg-user-dirs
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 169
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.15-2
Depends: libc6 (>= 2.14)
Conffiles:
 /etc/X11/Xsession.d/60xdg-user-dirs-update 408d38a4d3e161d0b21ea112bbe227b3
 /etc/xdg/user-dirs.defaults b8595963fe74aeb65e854ba9da7f1acb
 /etc/xdg/user-dirs.conf 602a95ec7fe4068512bebb712c41102d
Description: tool to manage well known user directories
 xdg-user-dirs is a tool to help manage "well known" user directories
 like the desktop folder and the music folder. It also handles
 localization (i.e. translation) of the filenames.
 .
 The way it works is that xdg-user-dirs-update is run very early in the
 login phase. This program reads a configuration file, and a set of
 default directories. It then creates localized versions of these
 directories in the users home directory and sets up a config file in
 $(XDG_CONFIG_HOME)/user-dirs.dirs (XDG_CONFIG_HOME defaults to
 ~/.config) that applications can read to find these directories.
Homepage: http://www.freedesktop.org/wiki/Software/xdg-user-dirs

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 42
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-25
Replaces: libusb-dev (<< 2:0.1.12-25)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Homepage: http://www.linux-usb.org/

Package: libnih1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 215
Maintainer: Scott James Remnant <scott@netsplit.com>
Architecture: amd64
Source: libnih
Version: 1.0.3-4.3
Depends: libc6 (>> 2.19), libc6 (<< 2.20)
Description: NIH Utility Library
 libnih is a light-weight "standard library" of C functions to ease the
 development of other libraries and applications, especially those
 normally found in /lib.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih

Package: libtext-template-perl
Status: install ok installed
Priority: extra
Section: perl
Installed-Size: 140
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.46-1
Depends: perl
Description: perl module to process text templates
 Text::Template is a library for generating form letters, building
 HTML pages, or filling in templates generally. A `template' is a
 piece of text that has little Perl programs embedded in it here and
 there. When you `fill in' a template, you evaluate the little
 programs and replace them with their values.
Homepage: https://metacpan.org/release/Text-Template/

Package: systemd-shim
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 52
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Version: 9-1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.39.4), cgmanager (>= 0.32)
Suggests: pm-utils
Breaks: systemd (<< 209)
Description: shim for systemd
 This package emulates the systemd function that are required to run
 the systemd helpers without using the init service

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 339
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.3-2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 369
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.8.22-0+deb8u1
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: libalgorithm-c3-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 58
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.09-1
Depends: perl
Description: Perl module for merging hierarchies using the C3 algorithm
 The Algorithm::C3 module implements the C3 algorithm.
 .
 C3 is the name of an algorithm which aims to provide a sane method resolution
 order under multiple inheritence. It was first introduced in the language
 Dylan, and then later adopted as the preferred MRO (Method Resolution Order)
 for the new-style classes in Python 2.3. Most recently it has been adopted as
 the 'canonical' MRO for Perl 6 classes, and the default MRO for Parrot
 objects as well.
Homepage: https://metacpan.org/release/Algorithm-C3

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 129
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.9 (4.9.2-10)
Version: 1:4.9.2-10
Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: libreadline6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 419
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline6 (6.3-8)
Version: 6.3-8+b3
Depends: readline-common, libc6 (>= 2.15), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2733
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.25.2-6
Replaces: bash-completion (<< 1:2.1-3)
Depends: initscripts, lsb-base (>= 3.0-6), tzdata (>= 2006c-2)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libmount1 (>= 2.25), libncurses5 (>= 5.5-5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libslang2 (>= 2.2.4), libsmartcols1 (>= 2.25), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-3), grml-debootstrap (<< 0.68)
Conffiles:
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
 /etc/init.d/hwclock.sh b5ca46c0c11ace2a1e40217c29646bf2
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 287
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: amd64
Multi-Arch: same
Source: ustr (1.0.4-3)
Version: 1.0.4-3+b2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library for ustr.
Homepage: http://www.and.org/ustr/

Package: libnih-dbus1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 145
Maintainer: Scott James Remnant <scott@netsplit.com>
Architecture: amd64
Source: libnih
Version: 1.0.3-4.3
Depends: libnih1 (= 1.0.3-4.3), libc6 (>= 2.2.5), libdbus-1-3 (>= 1.2.16)
Description: NIH D-Bus Bindings Library
 libnih-dbus is a D-Bus bindings library that integrates with the main
 loop provided by libnih.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih

Package: libclass-c3-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 79
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.26-1
Depends: perl, libalgorithm-c3-perl
Recommends: libclass-c3-xs-perl
Description: pragma for using the C3 method resolution order
 Class::C3 is a Perl pragma that modifies the standard method resolution order
 from depth-first left-to-right to the more sophisticated C3 method resolution
 order.
 .
 The C3 algorithm aims to provide a sane method resolution order with multiple
 inheritance. It was first introduced in the Dylan language, later adopted for
 Python 2.3. It is also the canonical MRO implementation for Perl 6 classes
 and is the default for Parrot objects as well.
Homepage: https://metacpan.org/release/Class-C3

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 575
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Version: 4.2.2-4+deb8u1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: http://www.gnu.org/software/sed/

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: smart column output alignment library
 The smart column output alignment library, used by fdisk utilities.

Package: libmodule-pluggable-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 91
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 5.1-1
Depends: perl
Description: module for giving  modules the ability to have plugins
 Module::Pluggable provides a simple but, hopefully, extensible way of having
 'plugins' for your module. Essentially all it does is export a method into
 your namespace that looks through a search path for .pm files and turn those
 into class names. Optionally it instantiates those classes for you.
Homepage: https://metacpan.org/release/Module-Pluggable/

Package: libcryptsetup4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 227
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:1.6.6-5
Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.90), libgcrypt20 (>= 1.6.1), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: http://code.google.com/p/cryptsetup/

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 66
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 5.3
Depends: lsb-base (>= 3.0-6)
Recommends: ifupdown
Breaks: ifupdown (<< 0.7)
Conffiles:
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/services 7d9960c77b363e2c2f41b77733cf57d4
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: libcpan-meta-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 362
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.142690-1
Depends: perl, perl (>= 5.15.0) | libjson-pp-perl, perl (>= 5.17.1) | libcpan-meta-requirements-perl, perl (>= 5.17.1) | libcpan-meta-yaml-perl, perl (>= 5.19.10) | libparse-cpan-meta-perl (>= 1.4414)
Description: Perl module to access CPAN distributions metadata
 Software distributions released to the CPAN include a META.json or, for older
 distributions, META.yml which describes the distribution, its contents, and
 the requirements for building and installing the distribution. The data
 structure stored in the META.json file is described in CPAN::Meta::Spec.
 .
 CPAN::Meta provides a simple class to represent this distribution metadata
 (or distmeta), along with some helpful methods for interrogating that data.
Homepage: https://metacpan.org/release/CPAN-Meta

